RSS 2.0
Natural Seawater Mimicking
Login
Unknown user
Reference
Facebook
Alternative Picture
Seawater Analysis
Additives
Removers
Marine Salts
Animal Care
Lighting
Reef Construction
Filtration
Product Dosing
[REEFC] CS REEF BOND STG 0,5 + 0,2 kg

Unique Stone-to-Glass harmless & animal-safe reef bond



Specification
See bellow...
Customs Tariff Code
3824.5090


Type of priceAmountCurrency
Price displays after login You can register here

Version 2014-VIII

CS Reef Bonds

Unique Stone-to-Stone and Stone-to-Glass harmless & animal-safe reef bonds

CS REEF BOND STS

CS REEF BOND STG

STS STG

Stone-to-Stone

Strong reef stones and ceramic bonding.

Stone-to-Glass

Strongly bonds reef stones and ceramic to glass.

 

CS REEF BOND STS

Not indended for underwater work!

Key advantages

  • One-component product
  • Water-dilutable
  • 100% water resitant
  • 45 minutes spreadable time
STS

Basic Instruction

  • Remove any free particles and dust from bonded surfaces
STS STS STS
  • Repeatedly moisten the bonded surfaces
  • Add small amount of water into the CS REEF BOND STS and mix well
  • Repeat until paste-consistency bond forms
STS STS STS
  • Apply bond on one surface in a thickness of 1 cm or more and press both surfaces together
  • Fix the stones and let the joint harden at least 48 hours - then the quality of joint increases in time
 

CS REEF BOND STG

Not indended for underwater work!

 

Key advantages

  • Two components ready to mix together
  • 100% water resitant
  • Permanent 40% elasticity
  • Hold-down force up to 1,7 MPa
  • 60 minutes spreadable time
STG ASTG A

Basic Instruction

  • Perfectly clean the glass from any dirt and grease
STG STG STG STG
  • Make the bonded surface of the stone even and remove any free particles and dust *
  • CS REEF BOND STG
    • Prepare desired amount of component B (liquid) into the bowl
    • Add small amount of component A (powder) and mix well
    • Repeat until paste-consistency bond form
    • Up to the 10% of water can be added if needed
STG STG STG
  • Apply bond on surface of the stone in a thickness of 1 - 2 mm
  • Firmly press the stone on the glass and fix it properly
  • Let the joint harden at least 48 hours

* If stone has too many cavities, fill them up with CS REEF BOND STS and wait 48 hours

 
TOPlist
Search
Contact us
Product Information
coral-shop
Bestsellers
Profi Plus Additives
Marine Line Additives
CS DispoPhos
CS NitraClean
Platinum Reef Additives
Test Kits
Animal Care Products
CS DeChlorAmm
Channel One Dosing
News
Most visited